Einkugel-Gummikompensatoren mit FlanschenREJ349

Gummikompensatoren

Einkugel-Gummikompensatoren mit Flanschen

Einkugel-Gummikompensatoren mit Flanschen in den Modellen S-10, S-10A und S-15 für DN32–DN600; 1,6 MPa bis DN300 und 1,0 MPa für DN350–DN500.

Datasheet values listedThe values below come from the manufacturer datasheet or our catalogue. Final values are confirmed in the quotation and supporting documents.

Product details

Technical specifications

Einkugel-Gummikompensator mit Grundkörper aus polarem Kautschuk, Nylon-Cordgewebe als Verstärkung, Gerüst aus hartem Stahldraht und Flanschen aus Baustahl. Beide Enden lassen sich auslenken und nehmen axiale und laterale Rohrbewegungen auf. Laut Quelltabellen beträgt der Betriebsdruck 1,6 MPa (DN32–DN300) bzw. 1,0 MPa (DN350–DN500), der Einsatzbereich −20 bis +115 °C; Baulängen und Bewegungsaufnahme je Nennweite stehen unten. Flansche nach anderen Normen werden nach Zeichnung gefertigt.

Luft- und DruckluftleitungenWasser-, Meerwasser- und HeißwasserleitungenAufnahme von Rohrbewegungen und Schwingungen an Pumpen und Anlagen

We confirm specifications and available configurations when preparing each quotation.

Produktcode
REJ349
Katalogkategorie
Gummikompensatoren
Modelle
S-10, S-10A und S-15
Grundkörper
Polarer Kautschuk
Verstärkung
Nylon-Cordgewebe
Gerüst
Harter Stahldraht
Flansche
Baustahl
Nennweite
DN32–DN600 (1¼"–24")
Betriebsdruck
1.6 MPa (DN32–DN300); 1.0 MPa (DN350–DN500)
Berstdruck
4.8 MPa (DN32–DN300); 3.0 MPa (DN350–DN500)
Vakuum
750 mmHg (DN32–DN300); 500 mmHg (DN350–DN500)
Einsatztemperatur
−20 bis +115 °C
Medien
Luft, Druckluft, Wasser, Meerwasser, Heißwasser, schwache Säuren
Bewegungsaufnahme
Axial: +Dehnung/−Stauchung; Lateralversatz; gesamte Winkelauslenkung (α1+α2)
DN32 (1¼")
L: S-10 95 / S-10A 150 / S-15 130 mm; axial +6/−10 mm; lateral 9 mm; Winkel 15°
DN40 (1½")
L: S-10 95 / S-10A 150 / S-15 130 mm; axial +6/−10 mm; lateral 9 mm; Winkel 15°
DN50 (2")
L: S-10 105 / S-10A 150 / S-15 130 mm; axial +7/−10 mm; lateral 10 mm; Winkel 15°
DN65 (2½")
L: S-10 115 / S-10A 150 / S-15 130 mm; axial +8/−13 mm; lateral 12 mm; Winkel 15°
DN80 (3")
L: S-10 130 / S-10A 150 / S-15 130 mm; axial +18/−15 mm; lateral 12 mm; Winkel 15°
DN100 (4")
L: S-10 135/150 / S-10A 150 / S-15 130 mm; axial +18/−19 mm; lateral 13 mm; Winkel 15°
DN125 (5")
L: S-10 170 / S-10A 150 / S-15 130 mm; axial +18/−19 mm; lateral 13 mm; Winkel 15°
DN150 (6")
L: S-10 180 / S-10A 150 / S-15 130 mm; axial +16/−19 mm; lateral 14 mm; Winkel 15°
DN200 (8")
L: S-10 195/205 / S-10A 150 / S-15 130 mm; axial +16/−20 mm; lateral 22 mm; Winkel 15°
DN250 (10")
L: S-10 230/240 / S-10A 200 / S-15 130 mm; axial +16/−28 mm; lateral 22 mm; Winkel 15°
DN300 (12")
L: S-10 245/260 / S-10A 200 / S-15 130 mm; axial +16/−28 mm; lateral 22 mm; Winkel 15°
DN350 (14")
L: S-10 265 / S-10A 200 / S-15 200 mm; axial +16/−28 mm; lateral 22 mm; Winkel 15°
DN400 (16")
L: S-10 265 / S-10A 200 / S-15 200 mm; axial +16/−28 mm; lateral 22 mm; Winkel 15°
DN450 (18")
L: S-10 265 / S-10A 200 / S-15 200 mm; axial +16/−28 mm; lateral 22 mm; Winkel 15°
DN500 (20")
L: S-10 265 / S-10A 200 / S-15 200 mm; axial +16/−28 mm; lateral 22 mm; Winkel 15°
DN600 (24")
L: S-10 265 mm; axial +16/−28 mm; lateral 22 mm; Winkel 15°
Material
Polar rubber body, nylon cord fabric, hard steel wire, mild steel flanges
Abmessungen
DN32–DN600 (1¼"–24")

Ordering

How to order this product

Prices are quoted per inquiry. Send the specification, quantity and destination and you receive a written quotation by e-mail, usually within two business days.

Minimum order
Confirmed in the quotation (ask us about trial quantities).
Lead time
Confirmed in the quotation, depending on quantity and configuration.
Packaging
Export packaging: rolls, cartons or pallets as required by the product and the shipment.
Port of loading
Shanghai, China (other ports on request).
Trade terms
EXW, FOB Shanghai, CFR or CIF, as stated in the quotation.
Payment
Bank transfer (T/T); letter of credit (L/C) negotiable for larger orders, as agreed in the quotation.
Samples
Available on request; sample and courier costs are confirmed before dispatch.
Documents
Commercial invoice, packing list, certificate of origin, test report or material certificate on request.

For an accurate quotation

Include the operating and delivery requirements that affect product selection.

When available, attach a specification sheet, drawing or reference sample details in your message.

01Material or grade

Required construction, coating, compound or reference grade.

02Dimensions and format

Thickness, width, length, diameter, weight or finished format.

03Operating conditions

Temperature, pressure, media, movement and service environment.

04Quantity and destination

Required quantity, delivery country and requested timing.

05Standards and documents

Applicable standard, test report, material certificate or origin document.