Single Sphere Rubber Expansion Joints with FlangesREJ349

Rubber Expansion Joints

Single Sphere Rubber Expansion Joints with Flanges

单球法兰式橡胶接头

Flanged single-sphere rubber expansion joints in models S-10, S-10A and S-15 for DN32–DN600, rated 1.6 MPa up to DN300 and 1.0 MPa for DN350–DN500.

Datasheet values listedThe values below come from the manufacturer datasheet or our catalogue. Final values are confirmed in the quotation and supporting documents.

Product details

Technical specifications

Single-sphere rubber expansion joint with a polar rubber body, nylon cord fabric reinforcement, hard steel wire frame and mild steel flanges. Both ends can be deflected to take up axial and lateral pipe movement. The source tables give working pressure of 1.6 MPa (DN32–DN300) and 1.0 MPa (DN350–DN500), a service range of −20 to +115 °C, and the length and displacement values for each nominal size listed below. Flanges to other standards are made to order against a drawing.

Air and compressed-air pipelinesWater, seawater and hot-water pipelinesAbsorbing pipe movement and vibration at pumps and equipment

We confirm specifications and available configurations when preparing each quotation.

Product code
REJ349
Catalogue category
Rubber Expansion Joints
Models
S-10, S-10A and S-15
Main body
Polar rubber
Reinforcement
Nylon cord fabric
Frame
Hard steel wire
Flanges
Mild steel
Nominal diameter
DN32–DN600 (1¼"–24")
Working pressure
1.6 MPa (DN32–DN300); 1.0 MPa (DN350–DN500)
Bursting pressure
4.8 MPa (DN32–DN300); 3.0 MPa (DN350–DN500)
Vacuum
750 mmHg (DN32–DN300); 500 mmHg (DN350–DN500)
Service temperature
−20 to +115 °C
Media
Air, compressed air, water, seawater, hot water, weak acids
Displacement values
Axial: +extension/−compression; lateral offset; total angular deflection (α1+α2)
DN32 (1¼")
L: S-10 95 / S-10A 150 / S-15 130 mm; axial +6/−10 mm; lateral 9 mm; angle 15°
DN40 (1½")
L: S-10 95 / S-10A 150 / S-15 130 mm; axial +6/−10 mm; lateral 9 mm; angle 15°
DN50 (2")
L: S-10 105 / S-10A 150 / S-15 130 mm; axial +7/−10 mm; lateral 10 mm; angle 15°
DN65 (2½")
L: S-10 115 / S-10A 150 / S-15 130 mm; axial +8/−13 mm; lateral 12 mm; angle 15°
DN80 (3")
L: S-10 130 / S-10A 150 / S-15 130 mm; axial +18/−15 mm; lateral 12 mm; angle 15°
DN100 (4")
L: S-10 135/150 / S-10A 150 / S-15 130 mm; axial +18/−19 mm; lateral 13 mm; angle 15°
DN125 (5")
L: S-10 170 / S-10A 150 / S-15 130 mm; axial +18/−19 mm; lateral 13 mm; angle 15°
DN150 (6")
L: S-10 180 / S-10A 150 / S-15 130 mm; axial +16/−19 mm; lateral 14 mm; angle 15°
DN200 (8")
L: S-10 195/205 / S-10A 150 / S-15 130 mm; axial +16/−20 mm; lateral 22 mm; angle 15°
DN250 (10")
L: S-10 230/240 / S-10A 200 / S-15 130 mm; axial +16/−28 mm; lateral 22 mm; angle 15°
DN300 (12")
L: S-10 245/260 / S-10A 200 / S-15 130 mm; axial +16/−28 mm; lateral 22 mm; angle 15°
DN350 (14")
L: S-10 265 / S-10A 200 / S-15 200 mm; axial +16/−28 mm; lateral 22 mm; angle 15°
DN400 (16")
L: S-10 265 / S-10A 200 / S-15 200 mm; axial +16/−28 mm; lateral 22 mm; angle 15°
DN450 (18")
L: S-10 265 / S-10A 200 / S-15 200 mm; axial +16/−28 mm; lateral 22 mm; angle 15°
DN500 (20")
L: S-10 265 / S-10A 200 / S-15 200 mm; axial +16/−28 mm; lateral 22 mm; angle 15°
DN600 (24")
L: S-10 265 mm; axial +16/−28 mm; lateral 22 mm; angle 15°
Material
Polar rubber body, nylon cord fabric, hard steel wire, mild steel flanges
Dimensions
DN32–DN600 (1¼"–24")

Ordering

How to order this product

Prices are quoted per inquiry. Send the specification, quantity and destination and you receive a written quotation by e-mail, usually within two business days.

Minimum order
Confirmed in the quotation (ask us about trial quantities).
Lead time
Confirmed in the quotation, depending on quantity and configuration.
Packaging
Export packaging: rolls, cartons or pallets as required by the product and the shipment.
Port of loading
Shanghai, China (other ports on request).
Trade terms
EXW, FOB Shanghai, CFR or CIF, as stated in the quotation.
Payment
Bank transfer (T/T); letter of credit (L/C) negotiable for larger orders, as agreed in the quotation.
Samples
Available on request; sample and courier costs are confirmed before dispatch.
Documents
Commercial invoice, packing list, certificate of origin, test report or material certificate on request.

For an accurate quotation

Include the operating and delivery requirements that affect product selection.

When available, attach a specification sheet, drawing or reference sample details in your message.

01Material or grade

Required construction, coating, compound or reference grade.

02Dimensions and format

Thickness, width, length, diameter, weight or finished format.

03Operating conditions

Temperature, pressure, media, movement and service environment.

04Quantity and destination

Required quantity, delivery country and requested timing.

05Standards and documents

Applicable standard, test report, material certificate or origin document.